Customize: screw-mounted wall hook
Wall plate
Two screw centres, 70 mm apart. Straight through-holes; screws and wall anchors are not included.
Hook size
Usable reach between the wall plate and tip: 44 mm.
About this screw-mounted wall hook
Make one compact, light-duty wall hook with a flat two-hole mounting plate. Set the plate and hook dimensions, then choose screws and anchors suitable for your wall separately.
What people make with it
- Small strap or loop — size the hook projection for the item you want to hang.
This Template makes one hook. Install several separate hooks in a row if needed; it does not generate a long multi-hook rack.
What you can change
- Wall plate. Height, width, thickness and straight through-hole diameter.
- Hook. Overall projection and retaining-tip rise.
Printing it
- Print the broad side on the bed. The two mounting holes pass through the plate; screws and anchors are not in the file.
- Check the model against your printer before generating. The hook prints as one piece and is not split.
Common questions
Which screws and anchors should I use?
Choose hardware for the actual wall material and measured hole diameter. This editor does not determine anchor strength or include hardware.
How much weight will it hold?
No load rating is claimed. Printed strength varies with material, orientation, settings and installation. Use only for light-duty organization after checking your own print and mounting.