2026-10-25 · templates v1.0.0, v1.0.2 · set 0c69cd93…

Made from the exact files you download for revision 1, stood on each other.
A wide desk organizer with drawers: the nine-compartment Wide studio organizer over a 90 mm and a 60 mm stackable drawer, 240 × 220 mm and 280 mm tall in all.
The Wide studio organizer over two drawers, 240 mm wide and 220 mm deep: four small trays in front, tape and tools in the middle, and three tall bays for brushes, markers and pens at the back.
Below it a 90 mm drawer with a slot and a 60 mm drawer with a notch, both made to the organizer's wider footprint, so the whole stack stays one width from the desk to the top of its back wall.
| Piece | Size | Files |
|---|---|---|
| Organizer | 240 × 220 × 130 mm | One file |
| Drawer A | 240 × 220 × 90 mm | Shell and insert |
| Drawer B | 240 × 220 × 60 mm | Shell and insert |
Top to bottom. Every piece is the same width and depth, which is what lets them stack: tabs on top of each drawer drop into recesses under the piece above it.
| Label | Inside size (approx.) | Position |
|---|
Stackable Desk Organizer
It prints as it stands, floor down, with no supports. The stacking recesses are cut into the base and need none either.
Stackable Storage Drawer
The shell is printed standing on its back, so no wall has to span the opening. The insert prints as it stands. The slot and the notch need no supports; the lip's level edge may need support, depending on your printer.
Each version keeps its own size, file and license. An earlier version stays available if this one changes.
Stackable Desk Organizer files
Full terms ↗CC-BY-4.0, inherited from Stackable Desk Organizer v1.0.0 and recorded with this revision. It cannot change later.
Stackable Storage Drawer files
Full terms ↗CC-BY-4.0, inherited from Stackable Storage Drawer v1.0.2 and recorded with this revision. It cannot change later.