Custom 3D printed rectangular planter
Preset: Windowsill trough 230 mm
Pot
Measured on the outside.
Walls and corners
Drainage
About this plant pot
A rectangular planter made to the space it has to fit, from a small square herb pot to a long window-box trough. Enter the width, depth and height, round the corners, choose the drainage holes, and download an STL to print. There is no CAD to learn.
What people make with it
- Square herb pot, 120 mm for one kitchen herb on a windowsill.
- Square houseplant pot, 160 mm for a small houseplant.
- Windowsill trough, 230 mm for a row of herbs along the sill.
Each is a starting point, with a saucer to match. Open one and change it to your own space. For a round pot, use the round plant pot.
What you can change
- Size. From 60 to 400 mm wide, 60 to 300 mm deep and 50 to 300 mm tall, measured on the outside, in millimetres or inches. Make the width and depth the same for a square pot.
- Corners. One radius rounds all four outside corners, up to half the shorter side. The inside corners follow it, less the wall, so the wall stays the same thickness all the way round.
- Drainage. A grid of holes, up to twelve along the width and eight along the depth, and how wide they are. Set either count to none for a closed floor.
- Walls and floor. Set the wall and the floor each from 1.6 to 12 mm thick. A big pot carries a lot of wet soil, so give it thicker walls and a thicker floor.
Printing it
- It prints as it stands, floor down, with no supports. The walls are straight and the drainage holes go straight down through the floor.
- Choose your printer and the editor checks that the pot fits its bed. A long trough may not: a pot is printed in one piece.
- You download an STL or 3MF file, ready for your slicer.
Cost and licence
- Free. Generate and download it without an account.
- Creative Commons Attribution 4.0. You may print it, change it, share it and sell your prints, as long as you credit IteraMesh as its creator. Read the licence
Common questions
What size should I make it?
The width, depth and height are the pot's outside size. Make it to the space it has to fit: the windowsill, the shelf, or the cover pot it sits inside.
Can I make a square pot?
Yes. Make the width and depth the same, and choose how round the corners are.
Can I make a pot without drainage holes?
Yes. Set the holes along the width or along the depth to none, and the floor is closed.
Is there a saucer to go with it?
Yes. The rectangular plant saucer is made to the size you enter, to catch the water that drains through. Make it a little wider and deeper than the pot.
Do I need an account?
No. You can generate and download without one. An account keeps your saved configurations, so you can come back to them.

