Choose STL for a simple, broadly compatible model file. Choose 3MF when your slicer supports it and keeping units, names or several objects together is useful—then verify your own printer and slicing profiles before printing.
The short answer
If you are unsure, download STL: it is the simpler, widely supported choice for moving one model into a slicer. Choose 3MF when your slicer supports it and you want one file that can keep units, object names and multiple parts together. On IteraMesh, both choices start from the same validated model geometry.
Neither file is ready to send straight to a printer. You still need to open it in a slicer, select your own printer, nozzle, filament and process profile, then inspect the sliced preview.
What each file holds
An STL is a mesh: a surface made from triangles. It carries the shape, but not a defined unit, object names, material information or printer settings. IteraMesh validates the STL geometry and presents its dimensions in millimetres; your slicer should open the download at that stated size.
A 3MF is a package made for 3D manufacturing. Its standard can carry geometry with defined units, separate objects and metadata in one file. An IteraMesh 3MF is derived from the same validated STL geometry, adds millimetre units and useful names, and can keep the pieces or Parts of one design as separate objects.
Choose by what you need to carry
| Situation | Choose | Why |
|---|---|---|
| You want the simplest route for one model | STL | It is broadly supported and contains the model geometry without project data. |
| The design has several Parts or split pieces | 3MF | One file can keep them as separate named objects instead of several STL files or a ZIP. |
| You use Bambu Studio, OrcaSlicer or PrusaSlicer | 3MF | IteraMesh can arrange the objects for that slicer, but you must replace the default project profile with your own setup. |
| Your slicer rejects the 3MF or opens it incorrectly | STL | Use the simpler geometry file, then arrange and configure it in the slicer yourself. |
Find the format on IteraMesh
The main button downloads the format you used last. Use the format control beside it to choose the other format. If you choose 3MF, IteraMesh asks whether the file is for Bambu Studio, OrcaSlicer, PrusaSlicer or another slicer so it can prepare a compatible object layout.
For a design with several Parts, STL asks which Part you want or offers all of them in a ZIP. A 3MF can put the whole design in one file while keeping each Part separate. This changes the packaging, not the underlying model shape.
Check the setup after opening either file
A 3MF made for a named slicer may open with a default printer or process profile so that its plate layout is understood. Treat that profile as a handoff detail, not a recommendation. Before slicing, select the printer, nozzle, build plate, filament and process you will actually use.
Then check that the model is on the build plate, fits the usable area and has the orientation you expect. Slice it and inspect the layer preview before exporting or sending the job. If those steps are new, follow the first-print Guide from download through preview.
What the format choice cannot decide
Choosing 3MF instead of STL does not improve the model’s fit, strength, surface finish or printability by itself. Those outcomes depend on the design, printer, material and slicing choices. Different slicers can also interpret optional 3MF project information differently, so use STL as the fallback when a 3MF does not open as expected.
Compare both formats on a real Preset
The Herb pot Preset offers both formats from the same download control. Open it, use the format control beside the main download button, and choose a file your slicer can open.