2026-11-02 · template v1.4.0 · file 507c7ba2…

Made from the exact file you download for revision 2.
SD card and USB drive holder — upright slots for six microSD cards, seven SD cards and four USB-A drives.
Seventeen upright slots in a 45 × 74 × 13 mm block: a row of six for microSD cards, a row of seven for full-size SD cards and a row of four for USB-A drives. The slots are sized from the standard card sizes, 11 × 1 mm and 24 × 2.1 mm, and the 12 × 4.5 mm USB-A plug, with 0.4 mm of clearance added.
Every slot is 9 mm deep, so a microSD card stands about 6 mm proud and is easy to pick out. If your cards sit in a case or your drive has a thicker plug, measure it and change the slots in Customize.
| Label | Inside size (approx.) | Position |
|---|---|---|
| Row 1 · Pocket 1 | 1.40 mm × 11.40 mm | Left · front |
| Row 1 · Pocket 2 | 1.40 mm × 11.40 mm | Left · front |
| Row 1 · Pocket 3 | 1.40 mm × 11.40 mm | Centre · front |
| Row 1 · Pocket 4 | 1.40 mm × 11.40 mm | Centre · front |
| Row 1 · Pocket 5 | 1.40 mm × 11.40 mm | Right · front |
| Row 1 · Pocket 6 | 1.40 mm × 11.40 mm | Right · front |
| Row 2 · Pocket 1 | 2.50 mm × 24.40 mm | Left · middle |
| Row 2 · Pocket 2 | 2.50 mm × 24.40 mm | Left · middle |
| Row 2 · Pocket 3 | 2.50 mm × 24.40 mm | Centre · middle |
| Row 2 · Pocket 4 | 2.50 mm × 24.40 mm | Centre · middle |
| Row 2 · Pocket 5 | 2.50 mm × 24.40 mm | Centre · middle |
| Row 2 · Pocket 6 | 2.50 mm × 24.40 mm | Right · middle |
| Row 2 · Pocket 7 | 2.50 mm × 24.40 mm | Right · middle |
| Row 3 · Pocket 1 | 4.90 mm × 12.40 mm | Left · back |
| Row 3 · Pocket 2 | 4.90 mm × 12.40 mm | Centre · back |
| Row 3 · Pocket 3 | 4.90 mm × 12.40 mm | Centre · back |
| Row 3 · Pocket 4 | 4.90 mm × 12.40 mm | Right · back |
How it prints
A solid block with pockets cut straight down: it prints pockets up, with no supports.
2026-11-02 · template v1.3.0 · file 507c7ba2…
Each version keeps its own size, file and license. An earlier version stays available if this one changes.
Generated model license
Full terms ↗CC-BY-4.0, inherited from Multi-row Pocket Organizer v1.4.0 and recorded with this revision. It cannot change later.