2026-10-25 · templates v1.0.2 · set a8134058…

Made from the exact files you download for revision 1, stood on each other.
Three stackable desk drawers, 60, 90 and 130 mm tall, in a tower 200 × 240 mm and 280 mm tall, the shallowest on top.
Three drawers and nothing on top: the shallowest, 60 mm, at the top for pens and cards, a 90 mm drawer for stationery under it, and a 130 mm drawer for chargers and tape at the bottom.
Each drawer has the grip that suits its height: a notch on the shallow one, a slot on the middle one, and a lip to hook under on the deep one. The top shell is flat, so it can take a monitor stand or a lamp.
| Piece | Size | Files |
|---|---|---|
| Drawer A | 200 × 240 × 60 mm | Shell and insert |
| Drawer B | 200 × 240 × 90 mm | Shell and insert |
| Drawer C | 200 × 240 × 130 mm | Shell and insert |
Top to bottom. Every piece is the same width and depth, which is what lets them stack: tabs on top of each drawer drop into recesses under the piece above it.
| Label | Inside size (approx.) | Position |
|---|
Stackable Storage Drawer
The shell is printed standing on its back, so no wall has to span the opening. The insert prints as it stands. The slot and the notch need no supports; the lip's level edge may need support, depending on your printer.
Each version keeps its own size, file and license. An earlier version stays available if this one changes.
Stackable Storage Drawer files
Full terms ↗CC-BY-4.0, inherited from Stackable Storage Drawer v1.0.2 and recorded with this revision. It cannot change later.